ASCD BRAKE SWITCH
Component Inspection (ASCD Brake Switch)
1.CHECK ASCD BRAKE SWITCH-I
- Turn ignition switch OFF.
- Disconnect ASCD brake switch harness connector.
- Check the continuity between ASCD brake switch terminals under the following conditions.
Is the Inspection result normal?
YES >> Inspection END
NO >> GO TO 2.
2.CHECK ASCD BRAKE SWITCH-II
- Adjust ASCD brake switch installation. Refer to .
- Check the continuity between ASCD brake switch terminals under the following conditions.
Is the Inspection result normal?
YES >> Inspection END
NO >> Replace ASCD brake switch.
|
