Inspection AND ADJUSTMENT
MIXTURE RATIO SELF-LEARNING VALUE CLEAR : Special Repair Requirement
1.START
With CONSULT-III
- Start engine and warm it up to normal operating temperature.
- Select "SELF-LEARNING CONT" in "WORK SUPPORT" mode with CONSULT-III.
- Clear mixture ratio self-learning value by touching "CLEAR". With GST
- Start engine and warm it up to normal operating temperature.
- Turn ignition switch OFF.
- Disconnect mass air flow sensor harness connector.
- Restart engine and let it idle for at least 5 seconds.
- Stop engine and reconnect mass air flow sensor harness connector.
- Select Service $03 with GST. Check that DTC P0102 is detected.
- Select Service $04 with GST to erase the DTC P0102. >> END
|