AUTO OPERATION DOES NOT OPERATE BUT MANUAL OPERATES NORMALLY (DRIVER SIDE)

Diagnosis Procedure

1. PERFORM INITIALIZATION PROCEDURE Perform initialization procedure. Refer to See: Programming and Relearning\Power Supply And Ground Circuit\Power Window Main Switch\LH Only Anti-Pinch-Coupe.

Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair or replace the malfunctioning parts.

2. CHECK ENCODER Check encoder. Refer to See: Component Tests and General Diagnostics\Power Supply And Ground Circuit\Power Window Main Switch\Component Function Check\LH Only Anti-Pinch-Coupe.

Is the Inspection result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.