Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Restraints and Safety Systems » Seat Belt Systems » Air Bag(s) Arming and Disarming » Service and Repair  
 
 
  Service and Repair  
 
  • Before servicing, turn ignition switch OFF, disconnect both battery terminals and wait at least 3 minutes.
  • Do not use air tools or electric tools for servicing.
  • Always work from the side of air bag module. Do not work from the front of it.
  • Always place air bag module with pad side facing upward.
  • Do not cause impact to the air bag module by dropping etc. Replace the air bag module if it has been dropped or sustained an impact.
  • After the work is completed, make sure no system malfunction is detected by air bag warning lamp.
  • In case a malfunction is detected by the air bag warning lamp, reset by the self-diagnosis function and delete the memory by CONSULT­III.
  • If a malfunction is still detected after the above operation, perform self-diagnosis to repair malfunctions. Refer to